Rear Stock Shock Upper Bar Pin Eliminator fits and replacers the weak stock shock mounts to a reliable and sturdy setup
Buy on Amazon

If you’ve noticed rattling from your Jeep Wrangler’s rear suspension or felt the vague, sloppy handling that comes with worn factory shock mounts, you’re dealing with a common weak point in TJ and JK models. The ELITEWILL Rear Shock Upper Bar Pin Eliminator replaces those problematic factory bar pin mounts with a solid, bolt-through design that eliminates play and noise while improving shock performance.

This upgrade swaps out the weak stock setup for a more reliable mounting solution that keeps your shocks properly positioned. You’ll notice the difference immediately—no more clunking over bumps, no more wandering feel on the highway. The kit includes two eliminators and all necessary hardware, and installation is straightforward with basic hand tools. You’ll slide the bolt into place, secure it to the frame with the included 10mm hardware, attach your shock, and tighten everything down with 3/4-inch wrenches. The whole job takes about an hour in your driveway.

Who Is This For?

This is for Wrangler owners who want to fix suspension noise and slop without spending big money on a full suspension overhaul. If you’ve got a 1997-2006 TJ or 2007-2018 JK (including Unlimited models, both 2WD and 4WD), and you’re hearing rattles from the rear or feeling loose handling, this addresses the root cause. It’s also smart preventive maintenance if you’re planning to keep your Jeep long-term or if you’re running larger tires that put extra stress on stock mounts.

Bottom Line

The ELITEWILL Bar Pin Eliminator is a simple fix for a known Wrangler weakness. It’s not flashy, but it solves a real problem—eliminating noise, tightening up handling, and giving your shocks a solid foundation. For the price and effort involved, it’s one of those upgrades that makes your Jeep feel more solid and composed every time you drive it.

  • “Rear Stock Shock Upper Bar Pin Eliminator fits and replacers the weak stock shock mounts to a reliable and sturdy setup”
  • “Replaces the rear upper bar pin shock mount,Eliminates rattling noises produced by the factory bar pin mount.”
  • “Fit for 2007-2018 4WD Jeep JK Wrangler; 2007-2018 4WD Jeep JK Wrangler Unlimited; 2007-2018 2WD Jeep JK Wrangler Unlimited; 1997-2006 4WD Jeep TJ Wrangler; 2004-2006 4WD Jeep TJ Wrangler Unlimited.”
  • “Package: Rear Bar Pin Eliminators x2,Hardware Kit x1.”
  • “With the bolt slid into place, screw the 10mm bolt into the frame next to the head of the bolt. Don’t completely tighten. Slide the shock bolt back and bolt the other side into the frame. Slide the bolt back into position. Tighten the first side. Put the nut onto the shock bolt and tighten with two 3/4″ wrenches. Bolt the bottom of the shock into the axle bracket.”