Everything You Need and So Much More
Everything You Need and So Much More
4 leads Available: Nilight 2 gang rocker switch wiring harness with 4 leads. Each switch controls a separate circuit with 2 leads. For example, you can install 4 lights on this wiring harness. Two are installed in the front of the car and two are installed in the rear of the car. Switch 1 controls the front lights and Switch 2 controls the rear lights.
SHORTEN UPGRADE AND REPAIR TIME – Quickly add additional equipment and lights, change the power connector, or redo your trailer cable without leaving any wire splices exposed to the elements.
Working environment: Can be used in 40F (105C) dry conditions and 15F (60C) wet conditions.Made of 30 Mil AWG copper with strength and life length.
Easy to tear. Just stick one end of tape to cable, start pulling and wrapping onto the cable and tear it gently. No need scissors and other tools. You can decide the length of the wire cloth tape according to you needs.
PLEASE LOOK at your factory wiring to see what connectors you have and verify you are ordering the correct harness. The harnesses in this listing will allow your 03 350z with a factory headlight harness that has 8 pins/wires to use a new headlight that has 6 pins/wires. Again, your car’s harness will have an 8 pin connector and your new headlight will have 6 pins. These new harnesses will allow you to plug that new 6 pin headlight into your 8 pin factory connector.