Everything You Need and So Much More
Everything You Need and So Much More
![[5Gbps Data Transfer]: The USB 3.0 interface of the external hard drive bay is compatible with SATA 6 Gbps, and the transfer speed reaches up to 235MB/s, facilitating effortless backup and transfer of files and videos, enabling centralized management and enhancing work efficiency](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
[5Gbps Data Transfer]: The USB 3.0 interface of the external hard drive bay is compatible with SATA 6 Gbps, and the transfer speed reaches up to 235MB/s, facilitating effortless backup and transfer of files and videos, enabling centralized management and enhancing work efficiency
N16 Quad M.2 M-Key NVMe SSD HAT is compatible with Raspberry Pi 5.
Hardware requirement: 1. There is available PCI-e 4.0 or 3.0 x16 Slot on Mobo 2. The motherboard can support PCIe x16 Bifurcation itself, and can be set as”PCI-e x4x4x4x4″ in BIOS 3. All of the SSDs are M.2 PCI-e (M Key) NVMe SSD 4. CPU has enough channels to support
4 SATA shieldsNo need for SATA-to-USB cables, just plug in 4 2.5″ SSDs for additional storage capabilities. The board is also reserved for a fan interface, which supports external 2.54 2pin fans to cool the Raspberry Pi. Please note that the thickness of a 2.5″ SSD cannot exceed 7mm.
COST-EFFICIENT: Increase your system speed and performance cost-effectively, by adding an M.2 PCIe NVMe SSD to your PC or server.
PCIe M.2 SSD TO 2.5″ U.2 ADAPTER: Increase your system speed and performance cost-effectively, by adding an M.2 PCIe NVMe/AHCI SSD to your PC or server with data transfer speeds up to 7.8GBps when used with a PCIe Gen 4 slot/system
USB3.0 Ultra Fast SpeedThis GODO 2.5″ SATA SSD/HDD RAID Enclosure equips with advanced chip and USB 3.0 output interface, the transfer speed can reach 6Gbps when using device with Windows 8.1 and above operating system and UASP TRIM USB Protocol.1G files are transferred in 3 seconds.