【Easy to use】: Put it in the water then the mist come out and it is 24 V voltage safe design. Install the mist maker under water depth 2 inches (water level: 0.6inch between mist maker sensor and water surface)
See on Amazon

I recently had the pleasure of trying out the PULACO Mist Maker, and I must say, it’s truly a remarkable addition to my home decor. The setup was a breeze – all I needed to do was submerge it in water, and voila! A dense, misty cloud began to rise, transforming my ordinary pond into an enchanting water feature. This mist maker is 100% water, odorless, and colorless, making it suitable for various settings such as ponds, rockeries, fish tanks, vases, birdbaths, and more. It’s particularly perfect for creating that spooky atmosphere during Halloween. The device employs both electro and ultrasonic technology, ensuring a consistent mist output. , The design is user-friendly, with a 24V voltage safe construction, making it a safe choice for any household. However, it’s essential to install the mist maker under a water depth of 2 inches (with a water level of 0.6 inches between the mist maker sensor and the water surface). The mist maker cable length is conveniently long at 7.0 ft, with 3.0 ft attached to the adapter and 4.0 ft attached to the mist maker. One thing I noticed was that the quality of the water used can influence the longevity of the device. It’s recommended to use clean tap water, and avoid using water with poor quality. Another point to remember is to switch off the power before performing any maintenance or movement, for safety reasons. The mist maker should not be operated continuously for more than 8 hours at a stretch. , Lastly, it’s important to keep your hands covered above the center mist while it’s operating, as contact may cause discomfort. Overall, I’m thrilled with this PULACO Mist Maker, and I highly recommend it for anyone looking to enhance their home decor or create that perfect Halloween ambiance.

  • PULACO mist maker can create dense mist for your pond or water tank in seconds, it is 100% water mist, smelless and colorless, use electro and ultrasonic technology. You can put it in your pond, rockery, fish tank, vase, birdbath, etc. It creates a magical atmosphere. Especially perfect for Halloween Mist scene decoration
  • Easy to use: Put it in the water then the mist come out and it is 24 V voltage safe design. Install the mist maker under water depth 2 inches (water level: 0.6inch between mist maker sensor and water surface)
  • Mist maker cable length: 7.0 ft, ( 3.0 ft attach to adapter, 4.0 ft attach to mist maker)
  • Note Ensure the water at high quality, use clean tap water, water quality deterioration may influence the lifetime. Please switch off the power before Movement or maintenance. Mist Maker should be fully submerged in water. Do not put your hands cover above the centre mist while it working, it may causing discomfort. Mist maker can not working continously over 8 hours

    • As an Amazon Affiliate, I earn from qualifying purchases.