【Auto VIN & Auto Scan & Full OBD2 Functions】This OBD2 scanner provides auto VIN, full-OBD2 diagnostic modes for Benz, Sprinter, Smart and Maybach vehicles, reading/clearing codes, enhanced I/M readiness (misfire monitor, fuel system, compo-n-ent monitor, E.VAP system,O2sensor heater, etc.) to check post-repair system conditions. Featured with on-board monitoring, O2sensor tests, freeze frame review, live graphic data, and VIN/CVN verification, this tool ensures accurate troubleshooting. The ability to read pending DTCs and permanent DTCs helps you get better health insights of your car, diagnosing car issues early, even intermittent ones.
See on Amazon
  • Full Systems In-depth DiagnosisDesigned specifically for Benz/Sprinter/Smart/Maybach(from 1996-2023), it diagnoses for deeper systems&sub-systems, covering 650 systems for Benz in total, 286 systems for Sprinter in total, 71 systems for Maybach (240) in total, 58 systems for Smart in total. For example, for Benz S(220), with 62 systems: SRS, ECM, TCM, suspension, AC, TPMS, instrument, ESP, door, stationary heater, Parktronic, Distronic, steering column, electronic selector, seat, electronic ignition, etc. MB V2.0 supports CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM, with live data, freeze frame&module info for efficient repair. Note: The available systems depends on the specific model.
  • Auto VIN & Auto Scan & Full OBD2 FunctionsThis OBD2 scanner provides auto VIN, full-OBD2 diagnostic modes for Benz, Sprinter, Smart and Maybach vehicles, reading/clearing codes, enhanced I/M readiness (misfire monitor, fuel system, compo-n-ent monitor, E.VAP system,O2sensor heater, etc.) to check post-repair system conditions. Featured with on-board monitoring, O2sensor tests, freeze frame review, live graphic data, and VIN/CVN verification, this tool ensures accurate troubleshooting. The ability to read pending DTCs and permanent DTCs helps you get better health insights of your car, diagnosing car issues early, even intermittent ones.
  • 9 Pro-Level Reset Functions for DIY MaintenanceEquipped with 9 services including Oil Reset, EPB Service, ABS Bleeding, SAS calibration, BMS service, Injector Coding, TPMS reset, DP reset, and ETC relearn, MB V2.0 contains many service sub-functions for more accurate maintenance, unlike other scanners just simply reset the warning lights or values. Such as for S(221) 2010, ETC service includes teach-in of throttle valve stop & intake port shutoff motor, teach-in for throttle valve actuator, replace throttle valve actuator, etc; injector coding service includes injector injection quantity adjustment, teach-in of used fuel injectors, etc. (Compatible with select models, not universal.)
  • Advanced BMS Service & Battery Voltage MonitorBMS Service includes sub-functions like isolation measurement, battery capacity /determination of status of high-voltage battery, signal generator for interlock circuit, high-voltage com po-nent lock/Unlock, high-voltage battery cooling system shutoff valve,etc. (model-specificcontact us for compatibility), MB V2.0 helps you boost battery performance and longevity, and recalibrates your BMS for optimal charging and discharging. Real-time battery voltage monitor provides instant insights into your battery’s health, preventing car generator failure and car starting problems in winter.
  • Expert-Level Oil Reset & SAS calibrationOil reset supports oil Service light reset, reset general maintenance, reinitialize ASSYST, days since last oil change, distance driven since last oil change, etc, for select models. SAS calibration includes more sub-functions for select models, for CLA(117), with reset the center position of the steering, etc, for CLA(118), with calibration of yaw rate sensor for lateral and longitudinal acceleration, resetting value Straight-ahead position of steering wheel, for S140, with road test, zero point variation steering angle and lateral acceleration sensor, etc, for GL166, with teach-in yaw rate, lateral and longitudinal acceleration sensor, etc.
  • Important Notice1. Certain systems operate independently from the ECU. To confirm whether our products can communicate with your car, please contact us before purchase, and the supported reset functions vary by model. 2. These models require the iCarsoft 38-pin adapter for Mercedes(NOT INCLUDED)- C Class:W202, W203 (before 2000), E Class:W210, W211 (before 2002), S Class:W140, W220 (before1998), CLK Class: 208 ( before 2003), SLK Class: 170, SL Class:129 (before 2002). 3. No matter what problems you meet, our engineers can solve them for you. Please feel free to contact us.
  • Master-Level TPMS Reset & EPB ServiceTPMS Reset includes sub-functions such as: for GL(164), activate function tire pressure loss warning, write wheel electronics identification number, write identification numbers of tire pressure sensors, write tire pressure specified values, test signal transmission between pressure monitor sensor and TPM [RDK] control unit, tire pressure sensor,etc. EPB services for example, for CLA(118) includes calibration of electric parking brake, calibration of pedal angle sensor, test of pedal angle sensor, function test of brake light switch, calibration of parking system control unit, etc.
  • Technician-Grade ABS Bleeding & DP ResetStruggling with incomplete manual bleeding? Try MB V2.0s ABS bleeding services for easy and effective bleeding from modulesimportant after replacing brake blocks/ABS pumps, changing or adding brake fluid, or replacing tires/misaligning brake pedals. D P reset includes sub-functions for efficient and precise maintenance, for example, for CLA(117), post-replacement teach-in for D. P filter & temperature sensor upstream actuator, regeneration of D- P filter when driving, resetting air fi-lter learned values.
  • Graphic Live Data & Module InfoMB V2.0 OBD2 car scanner displays the overall vehicle health data allowing you to monitor the conditions of com po-nents, systems and sensors and whether live graphical data shows any malfunctions post-repair, including key PIDs (RPM, coolant temperature, MAF), fuel consumption, and transmission oil temperature. With live data, you can check if the car is working optimally after customization or upgrades, promptly detect issues like increased fuel costs, and reduce expenses by adjusting your driving style. This tool also displays module info to confirm com po-nent version to ensure right replacement.
  • Compatibility CheckMB V2.0 supports for Sprinter the following chassis: VANEO(16PIN), Citan 415, (VITO/V) – Class Model Designation 447, (VITO/V) – Class, VITO/V-Class Model Designation 638, VITO/VIANO Model Designation 639 (OBDIl), Sprinter 690.6, Sprinter 901.6,902.6,903.6,904.6,905.6, Sprinter906/900, Sprinter909, Sprinter 907, Sprinter910, Citan 420, X470/471. VANEO(16PIN), VITO/V-Class Model Designation 638. Oil Reset supported models: For VANEO(16PIN), VITO/V-Class Model Designation 638, VITO/VIANO Model Designation 639 (OBDII), Sprinter 690.6, Sprinter 901.6,902.6,903.6,904.6,905.6, Sprinter 906/900

    • As an Amazon Affiliate, I earn from qualifying purchases.